Sun-grown Rif cannabis is cured, cleaned by hand and turned in stainless-steel drums to release its trichomes. The resin is screened between 120 and 90 µm, dried at low temperature to protect aroma and limit microbial load, then pressed into uniform blocks.
Dry resin follows the traditional Moroccan method: trichomes separated from sun-grown, cured cannabis by mechanical sifting alone, then pressed into blocks. We produce it at our ANRAC-authorised facility from outdoor-grown plants of the Rif, with the steps below documented for every batch.
| Parameter | Dry resin |
|---|---|
| Starting material | Outdoor-grown, air-dried and cured cannabis from Chefchaouen province |
| Separation | Mechanical: rotating drums and micron screens |
| Micron range | 120–90 µm |
| Solvents | None |
| Finish | Pressed blocks |
| Formats | 1 kg bars, 100 g, 10 g, custom |
Cannabinoids are profiled by HPLC in our on-site laboratory, and contaminants are tested by independent laboratories: pesticide residues against EU maximum residue limits, aflatoxins B1, B2, G1 and G2, and microbiology to European Pharmacopoeia methods. Full reports are shared with approved buyers in the portal. Our guide How to read a cannabis resin COA explains each section of a certificate.
Dry resin keeps the character of traditional Moroccan hash while the screen range, drying and pressing are controlled and repeatable. It suits buyers who want a pressed, full-spectrum resin with a defined micron range and a documented, solventless process. For a more refined grade from the same starting point, compare Static Resin; for unpressed material sorted by grade, see Powder Resin.
As an ANRAC-licensed exporter, we manage export logistics up to the buyer's customs clearance point. Supply is reserved for licensed importers, distributors and pharmacies: apply for trade access to see pricing and current availability.
The trichomes are collected over screens between 120 and 90 µm. That range yields a full-spectrum kief, which is then dried and pressed. For a narrower grade, see Powder Resin, which is supplied by single micron grade or blended.
No. It is a mechanical process: rotating stainless-steel drums release the trichome heads, micron screens separate them, and a mechanical press forms the blocks. No solvent, water or chemical is involved.
Every batch has a certificate of analysis, and full laboratory reports are available to approved buyers in the portal. You can also request a COA from this page. Export shipments are handled under our ANRAC export authorisation 54/A8/0223.
1 kg bars, 100 g and 10 g formats, and custom solutions agreed per contract. Pricing and availability are shown to approved buyers in the buyer portal.